Expériences — Romain V.

Experiences

Weld World :
CFSI Analyst - Division Qualité Industrielle

Welding industry
Technical Assistance, Inspection and Training

Amaris Inspection
Quality Engineer- Ailes Marines
Inter Array Cables
- Review of As Built reports
- Review of manufacturing Record Book
- Management of punch lists
- Follow-up of quality indicators

Weld World :

Quality monitoring of work during furnace shutdown (KNS site):
- Inspect Welding – Forming – Assembly and Controls operations.
- Monitoring and reporting of manufacturing progress
- Compile documentation
- Ensure the follow-up of non-conformities and corrective actions

Amaris Inspection
Manufacturing Inspector for the Provence Grand Large (PGL) project
Offshore wind turbine floats
Material: Steel
Tension leg Platform (TLP) - Components up to 330 tons
SBM Offshore Concept
Welding processes: SAW - FCAW - MCAW - GTAW - SMAW
NDT : UT / MT / VT
EDF Renouvelable / Amaris Inspection , Yard Eiffage Métal in Fos sur mer
- Guarantee the application of HSE rules on site
- Inspect welding - assembly - inspection operations.
- Write and distribute inspection reports.
- Monitor manufacturing progress
- Evaluate documentation
- Verify and validate NDT and dimensional inspection reports.
- Follow-up on non-conformities and corrective actions.
- Support engineering in the field of welding
- Monitor inspections by the project's certifying body
- Organize and coordinate NDT cross-check missions
- Write up experience feedback

Conformity assessment of Hinkley Point C Q1 valves: Main steam isolation valve - Main feedwater isolation valve - Pressure steam valve
Lloyds Register Apave (JV)
EDEEM100122 et EDEEM 120122
Material: Steel - Cladding ( Wear Resistant and Corrosion Resistant Alloys)
Welding processes: SAW - GMAW - GTAW - SMAW
- Risk analysis
- Special materials evaluation
- Quality plans
- Manufacturing and inspection procedures
- Welding manuals.

For Apave
- Inspect Welding - Forming - Machining - Assembly and Control operations.
- Write and distribute inspection and control reports.
- Follow-up and report on manufacturing progress (expediting).
- Evaluate the documentation associated with AIPs.
- Verify and validate NDT and dimensional inspection reports.
- Review radiograms (Spot check)
- Follow-up on non-conformities and corrective actions

Department missions
- Definition and management of continuous improvement projects < M€.
- Recruitment and training of welders, supervisors and technicians
- Optimize production methods and processes
- Contribute to production planning (Load/Capacity adequacy)
- Contribute to product design optimization (Slimline Annular - RCD)
- Liaison between welding engineering and other departments
- Search for root causes of welding non-conformities
- Carry out safety and technical inspections
- Formalize best practices / Make processes more reliable
- Industrialize new parts and develop robotized welding
- Supplier training (Nabertherm - Fronius - IGM)
- Coordinate welding equipment calibration operations in the workshop
- Analyze variances on production and purchasing orders
Robotic welding project
- Purchase and installation of a welding robot
- Drawing up specifications and sending out tenders
- Analysis of quotations and selection of suppliers
- Creation of layout drawings and supplier acceptance (IGM)
- Management of welding engineering for PQR development
- Supervision of filler material and gas selection tests
- Steering of industrialization tests
- Updating standard ranges and costs
6Sigma project Welding quality improvement
- Welding quality improvement
- Creation of a (multidisciplinary) team and an Ishikawa diagram
- Analyze non-conformities and draft good welding practices
- Verify compliance with good practices through Technical Visits
- Development of a Welding Management System (WMS) application
- Define performance indicators and integrate them into the WMS
6Sigma project: Bringing the heat treatment process under control
- Creation of a (multidisciplinary) team
- Conduct a Failure Mode, Effects and Criticality Analysis (FMEA)
- Process modeling (internal and external) using Visio software (Process Map)
- Implement the new process
- Internal process control with foremen
- Drawing up specifications for modifications to furnace management software
- Implement new software
- Training of foremen and drafting of user instructions
Project to increase welding capacity
- Purchase of welding machines and heat treatment furnaces
- Drawing up specifications and sending out invitations to tender
- Analysis of quotations and selection of suppliers
- Start-up of equipment and training of operators after recruitment
- Factory Acceptance Test at furnace supplier (Nabertherm - Germany)
- Training at welding equipment supplier (ETR, Fronius - Austria)

For Sofren :
Supervision of : Fives Nordon - ACPP - VAT - VG Scienta - COMEX - Leybolds
Vacuum - PCI
Supervision of the installation of piping, skids and valves:
Aluminum vacuum piping 2" to 6" - Pumps - UF6 valves
Welding processes: GTAW-A Orbital
NDT: VT - UT / Helium leak test
- Supervise subcontractors in charge of assembly work
- Lead site meetings and draft reports
- Ensure compliance with Technical Specifications
- Ensure strict application of HSE rules on site (safety inspections)
- Identify, formalize and participate in the resolution of non-conformities (FSS)
- Check work quality (FVC)
- Check compliance with specifications and standards (STD)
- Contribute to planning and daily monitoring of deviations
- Manage on-site interference
- Ensure compliance with deadlines, milestones and stopping points defined in the schedule.
- Supervise site withdrawal at the end of work and site restoration.
- Interface with customer's operational teams
- Validate suppliers' physical progress
- Monitor completion of FME - FAD and DI.
- Pre-acceptance of work, preparing acceptance reports with each company
- Draw up lists of reservations and tests
- Write the surveillance report and the EXS follow-up with the RCE
- Write the REX feedback report with the RCE.
- Transfer installations to testing.

Workshop and site supervision - Business management
Customers: Comhurex Malvesi - Cameron France - Buesa - Razel Bec - Aérocomposite Occitanie - Lyonnaise des eaux - SAUR - Placoplatre
Fabrications: Wind turbine blade mould support (30m) - Transport skids
transport - Stairs - Fenders - Piping - Maintenance
Welding processes: SMAW - GTAW-M - GMAW
NDT : PT - VT
Industrial maintenance and service management
- Processing calls for tender (CCT, Specifications)
- Draw up and send out sales proposals
- Define resource requirements (human/material)
- Purchase raw materials and auxiliary products
- Creation of manufacturing drawings
- Launch workshop and site orders
- Supervision of manufacturing and installation teams
- Subcontract management - Coating and laser cutting
- Follow-up and progress of job sites
- Oversee the winding down of the site at the end of the work and the restoration of the site.
- Preliminary welding DMOS according to ASME IX.
- Dimensional and visual inspection (welds).

Welding Technologist / Site Manager
Fabrications for the oil, chemical, nuclear and cement industries
Forming and welding: HLE steels - Aluminium - Stainless steels - Cladding
Customers : Technip - Cegelec - Packinox - Air Liquide - Pirson - Polysius - Total
Kvaerner - Heurtey - CNOOC- CHEVRON - Gaz de France - SAIPEM
Welding processes: SMAW - GTAW- ESW - SAW - GMAW
NDT : RT / UT / MT / PT - Laser Tracker
- Drafting of welding specifications and inspection and test plans (ITP)
- Welding human resources management (induction qualifications)
- Non-destructive testing (penetrant testing and magnetic particle inspection) and dimensional testing
- Planning of subcontracting operations (TOFD-RT-UT-TTH)
- Reception of surface preparations/coatings
- Inspections and acceptance of subcontracted equipment (International).
Workshop follow-up -CEGELEC : Experimental chamber for the megajoule laser (LMJ CEA) - Aluminium sphere --Thickness 120 mm diameter 10m
- Technip : HDS reactor for Feyzin - Steel 1.25 Cr clad 347- Thickness 80 mm
  -Packinox: Stainless steel plate heat exchangers - 2.25 Cr steel P420 HT L2 - 55 mm - Diam. 12 m
  Sollac: HF1 shielding for Pirson
- Eluxyl: Chemical industry internals for Axens
Akpo Project - Pressure vessels for Technip to ASME (Total)
- Daily reporting (customer project manager)
- Definition and implementation of corrective actions to guarantee deadlines
- Interface between different production departments-Acceptance and control of subcontracting operations
- Optimization of production times and costs-Review of documentation
- Acceptance and control of subcontracting operations-Compilation of manufacturers' files (paper and digital)- Review of documentation- Compilation of manufacturers' files (paper and digital)
Site foreman On U. S. Steel Košice (Slovakia)
- Nitrogen and oxygen storage for Air Liquide
  Double-jacket tanks Carbon steel and stainless steel
- Manage the team and subcontractors responsible for carrying out the work (10 p.)
- Contribute to planning and daily monitoring of drifts-Perform hydraulic tests
- Compile manufacturer's file
- Subcontract management - Passivation / Perlitage

Votre navigateur est obsolète !

Romain V.

Manufacturing Welding Engineer

French

Quality Engineer - CFSI

Freelance

Quality Engineer- Ailes Marines

Inspecteur QA/QC

Manufacturing Inspector Provence Grand Large (PGL)

Nuclear Valves Project Manager Q1 - ITPIA– Projet Hinkley Point C

ITER Vacuum Vessel Manufacturing Inspector

Head of manufacturing support welding department

General Installation Supervisor Georges Besse site 2

Ingénieur Alternant

Welding Technologist